Kenwood SW-305 Instruction Manual page 18

18
If the amplifier is not equipped with a Subwoofer Pre-Out jack or if two subwoofers are to be used
Before connection: Set the POWER switches of the amplifier and Subwoofer to OFF. If they are connected with the
When connecting the Subwoofer to the amplifier, be sure to always connect the "+" terminals to "+" terminals and the "–"
terminals to "–" terminals. If terminals are connected incorrectly, the amplifier may be damaged.
Speaker cords are not supplied, Please use a speaker cords with thick conductor.
Note
Note Note
Using one subwoofer
Speaker cord (Commercially available parts)
B FRONT SPEAKERS
(6 — 16‰)
R L R
Speaker terminals
(Amplifier or Receiver)
Using two subwoofers
INPUT
FROM
AMPLIFIER LINE
+ R - R - L + L
L L
R R
TO (MONO)
SPEAKERS + R - R - L + L
OUTPUT
SW-505D
SUBWOOFER
(Right channel)
When the amplifier has two stereo speaker output circuits which can output signals simultaneously, the front speakers do not have
to be connected through the subwoofer(s) but can be connected directly to the amplifier, whether the number of subwoofers used
Note Note Note
is one or two.
POWER switch(es) left ON, one or both components may be damaged.
INPUT
FROM
LINE
AMPLIFIER + R - R - L + L
L
L
R
R
TO (MONO)
SPEAKERS
+ R - R - L + L
OUTPUT
A
L
+
–
SW-505D
SUBWOOFER
1 2
Twist wires
conductor
Speaker cord (Commercially available parts)
INPUT
FROM
Speaker terminals
AMPLIFIER
+ R - R - L + L
(Amplifier or Receiver)
TO
SPEAKERS
+ R - - L +
R L
OUTPUT
– +
Front speaker (R)
INPUT
FROM
AMPLIFIER
+ R - R - L + L
TO
SPEAKERS
+ R - - L +
R L
OUTPUT
Speaker cord
(Commercially
available parts)
– +
Front speaker (L)
Front speaker (R)
3
Push Insert the conductor
B FRONT SPEAKERS A
R L (6 — 16‰)
R L
+
–
CAUTION
The front speakers connected with the Subwoofer should have the
impedance specified by the amplifier or receiver in use.
1 3
Twist wires
Insert the
conductor
conductor
2 4
Push Release
CAUTION
The front speakers connected
with the Subwoofer should
have the impedance specified
by the amplifier or receiver in
use.
– +
4
Release
INPUT
FROM
AMPLIFIER
+ R - R - L +
TO
INPUT
SPEAKERS + R - R - L +
FROM
OUTPUT
AMPLIFIER
+ R - - L +
R L
TO
SPEAKERS
+ R - R - L + L
OUTPUT
SW-505D
SUBWOOFER
(Left channel)
– +
Front speaker (L)
Connections
SW-505D (EN)
LINE
L
L L
R R
(MONO)
L