Armband - Motorola SB1 User Manual

Armband

Use the Armband to wear the SB1 on the arm.
To install the armband:
Feed the end of the armband through the buckle ensuring that the rubber grip side is facing inside.
Armband
Figure 4-14
Slide the armband onto the arm to a comfortable location.
1.
Pull the end of the armband and fold over so that the hook material attaches to the loop material.
2.
Hook Material
Install Armband
Figure 4-15
Insert the clip of the holster in between the two sections of the armband.
3.
Rubber Grip Material
Buckle
Loop Material
Accessories 4 - 11
Hook Material