Page 1
DVD Pak OLED WARNING! Read this Operator’s Manual Trade Tool is an Authorized Service Centr and a Ridgid Pro Platinum distributor carefully before using this Trade Tool is an Authorized Service Center and a tool. Failure to understand Ridgid Pro Platinum distributor and follow the contents of www.tradetoolsupply.com...
DVD Pak SeeSnake ® Table of Contents Recording Form for Machine Serial Number ......................1 Safety Symbols................................2 General Safety Rules Work Area Safety................................2 Electrical Safety ................................2 Personal Safety ................................2 Equipment Use and Care............................3 Battery Use and Care ..............................3 Service ..................................3 Specific Safety Information ............................3 DVD Pak Safety ................................4 Description, Specifications and Standard Equipment Description ..................................4...
DVD Pak SeeSnake ® SeeSnake ® DVD Pak OLED DVD Pak SeeSnake ® Record Serial Number below and retain product serial number which is located on nameplate. Serial...
DVD Pak SeeSnake ® Safety Symbols In this operator’s manual and on the product, safety symbols and signal words are used to communicate important safety information. This section is provided to improve understanding of these signal words and symbols. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
SeeSnake ® DVD Pak Equipment Use and Care another. Shorting the battery terminals together may cause burns or a fire. • Do not force equipment. Use the correct equipment for your application. The correct equipment will do the • Under abusive conditions, liquid may be ejected job better and safer at the rate for which it is designed.
SR-60, the Scout™ or the NaviTrack ® II). sonal injury. • A RIDGID transmitter (such as the ST-510, the ST-305, • Always use appropriate personal protective equip- the NaviTrack ® Brick or the NaviTrack ®...
SeeSnake ® DVD Pak DVD Pak Components Dimensions (Closed): Length ......(35 cm) w/o Battery Sun Shade Width ......9.1" (23 cm) Height ......5.3" (13'4 cm) Power Source....100-240VAC/50-60Hz, AC or DVD Pak Display 18 VDC Rechargeable Battery Battery Type ....1 x 18 V Li-Ion, 2.2 Ah Power Rating....14-16VDC 40W DVDR Display 12 VDC 30 W (DVDR Only)
Ridge Tool Catalog, online 3. Inspect the DVD Pak for any broken, worn, missing, at www.RIDGID.com or www.RIDGID.eu. misaligned or binding parts, or any other condition 4. Make sure all equipment has been properly inspected.
Powering The SeeSnake DVD Pak The SeeSnake DVD Pak can either be powered with RIDGID Li-Ion rechargeable battery or plugged in to Figure 4 – Connecting System Plug to DVD Pak System an outlet using a supplied AC/DC power converter.
SeeSnake ® DVD Pak Outlet Power Battery Power With dry hands, slide a fully charged battery onto the bat- For plug in operation, a double insulated AC/DC power supply is supplied to reduce wall outlet voltage to the cor- tery dock on the back of the DVD Pak . rect voltage for the DVD Pak .
® DVD Pak SeeSnake DVD Pak Settings Units Setting The DVD Pak can be set to display distance in meters or The following settings may need to be checked or modi- feet, or to allow the setting to be selected automati- fied depending on where and how you are using the cally.
DVD Pak SeeSnake ® DVD Pak Controls Keypad Controls Microphone Arrow Keys: Used to move among menu choices and adjust variables (such as contrast) up and down. Select Key: Used to choose options in the Units menu (Auto, Meters and Feet). Keypad Return Button Menu Key: Used to bring up a menu of display options such...
SeeSnake ® DVD Pak Operating Instructions WARNING Always wear eye protection to protect your eyes against dirt and other foreign objects. When inspecting drains that might contain haz- ardous chemicals or bacteria, wear appropriate protective equipment, such as latex gloves, goggles, face shields or respirators, to prevent burns and in- fections.
DVD Pak SeeSnake ® line, depending on conditions. To do so simply press the 3. To PAUSE press the Record button. Press it a- Brightness Key and raise or lower the brightness gain to resume. level using the Arrow Key .
Locating The Camera Using The Sonde Many SeeSnake pipe inspection systems have a built-in Sonde which transmits a locatable 512 Hz signal. When the Sonde is turned on, a locator such as the RIDGID SR-20, SR-60, Scout™ or NaviTrack ®...
LCD screens to clean the screens. Do not allow any liquid to enter the DVD Pak . For information on your nearest RIDGID Independent Service Center or any service or repair questions: • Contact your local RIDGID distributor.
Help to protect the environment and conserve natural resources by returning your used batteries to your local retailer or an authorized RIDGID ser- vice center for recycling. Your local recycling center can also provide you with additional drop off locations.
Flashing Battery Warning DVD Pak 18 V batteries low. Recharge DVD Pak batteries. Switch to AC power appears. (110/220VAC). Trade Tool is an Authorized Service Centr and a Ridgid Pro Platinum distributor www.tradetoolsupply.com 503.221.8665 Rental units available Ridge Tool Company...