Equipment Setup - NETGEAR DVG1000 Quick Start Manual

Equipment setup

Step 1 - Your equipment
Once you have received your ADSL activation email from us, take the
following equipment out of the box.
Modem Router
Phone Cable
Power Adaptor
Ethernet Cable
Step 2 - Connect splitter
(not required for Naked DSL)
Connect a DSL splitter directly to
the telephone. If you do not have
an existing splitter, please purchase
one from a retail store - alternatively
contact Customer Service to order
a splitter.
Step 3 - Connect router
Connect the supplied grey
telephone cable from the splitter's
ADSL port to the grey ADSL port on
the Modem Router.
Step 4 - Connect your home
telephone (not required for
Naked DSL)
Connect your telephone to the
phone port on the splitter.
7