D-Link DCS-6410 User Manual page 18

Section 3 - Configuration
The Setup Wizard will appear and show the MAC address of your
DCS-6410 and an IP Address (which may or may not be correct,
depending on what you have your DCS-6410 connected to). If you
have a DHCP server on your network, there will be a valid IP Address
displayed here. Click the Wizard button to continue.
Note: A DHCP server is a device that supplies the IP address.
Enter the admin ID and password.
Note: By default, Admin ID is admin and the password is left blank.
Click Next
D-Link DCS-6410 User Manual 18