Page 1
INSTRUCTION MANUAL Cordless Rotary Hammer BHR240 007338 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
For European countries only Sound power level (L ) : 99 dB(A) EC Declaration of Conformity Uncertainty (K) : 3 dB(A) Makita Corporation responsible Wear ear protection manufacturer declare that the following Makita ENG215-2 machine(s): Vibration Designation of Machine: vibration total value (tri-axial...
Europe who is: Keep cord away from heat, oil, sharp edges or Makita International Europe Ltd, moving parts. Damaged or entangled cords Michigan, Drive, Tongwell, increase the risk of electric shock.
Power tool use and care Service 17. Do not force the power tool. Use the correct 28. Have your power tool serviced by a qualified power tool for your application. The correct repair person using only identical replacement power tool will do the job better and safer at the parts.
SAVE THESE INSTRUCTIONS. 14. Some material contains chemicals which may be toxic. Take caution to prevent dust Tips for maintaining maximum battery life inhalation and skin contact. Follow material Charge battery cartridge before supplier safety data. completely discharged. Always stop tool operation and charge the SAVE THESE INSTRUCTIONS.
Page 6
Switch action Selecting the action mode Rotation with hammering 1. Switch trigger 1. Rotation with hammering 2. Lock button 3. Action mode changing knob 007340 007042 CAUTION: For drilling in concrete, masonry, etc., depress the lock Before inserting the battery cartridge into the tool, •...
Torque limiter 1. Bit shank The torque limiter will actuate when a certain torque 2. Bit grease level is reached. The motor will disengage from the output shaft. When this happens, the bit will stop turning. CAUTION: As soon as the torque limiter actuates, switch off •...
The bit can be secured at the desired angle. To change attached to is as follows. the bit angle, depress the lock button and rotate the Bit diameter action mode changing knob to the O symbol. Turn the bit Dust cup 5 6 mm - 14.5 mm to the desired angle.
Blow-out bulb (optional accessory) Use the optional drill chuck assembly. When installing it, refer to "Installing or removing the bit" described on the 1. Blow-out bulb previous page. Set the action mode changing knob so that the pointer points to the symbol.
Page 10
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. SDS-Plus Carbide-tipped bits • Bull point • Cold chisel •...
Page 12
Makita Corporation Anjo, Aichi, Japan 884669B222...