Table of Contents
Advertisement
trouBLEShootINg
ProBLEM
Motor doesn't start or blade
doesn't rotate
Food is unevenly chopped
Food is chopped too fine or
is watery
Food sticks to blade and jug
Blender overloaded
(all lights flashing)
12
EASy SoLutIoN
•
Check that the power plug is properly inserted into
the power outlet.
•
Check the ON | OFF button and selected function
button is illuminated.
•
If all lights are flashing in unison,, refer to the
'blender overload' solutions below.
•
This can happen when too much food is being
blended at one time. Try a smaller amount, and
work in batches if necessary.
•
The ingredients may be too large. Try cutting into
smaller pieces. For best results, ingredients should
be in pieces no larger than 2cm.
•
Try blending for shorter period of time. Use the
PULSE function for better control.
•
The mixture may be too thick. Try adding more
liquid and/or using a slower speed for blending.
•
This blender has overload protection to prevent
damage to the motor. Unplug and allow the
blender to cool down for 15 minutes. Once cooled,
you will be able to use the blender as usual again.
•
We recommend blending in smaller batches, or
cutting ingredients into smaller batches.
Hide quick links:
Advertisement
Table of Contents
