Cisco Telepresence System EX60
Contents
Introduction
Administrator Settings—SIP Settings
The SIP settings pane lets you specify:
•
Your URI.
•
The Default transport layer, this can be set to TCP,
UDP, TLS or Auto.
•
The Proxy type can be set to Standard, Alcatel,
Avaya, Cisco, Microsoft, Nortel, Experimental,
Siemens.
The experimental setting is for testing purposes.
•
Outbound is not used in this version.
•
Proxy discovery can automatic or manual. In the case
of manual the proxy address must be specified by you.
•
Login name and Password is required by the VCS.
Be sure to:
•
Tap Save to put settings into effect.
D14779.04
User guide EX60, TC4.2, July 2011
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60
Using EX60
34
The settings
The settings
Web interface
User guide
Contact us
www.cisco.com