Table of Contents
Advertisement
4.
Select ADVANCED > USB Storage > Advanced Settings.
5.
Scroll down to the Available Networks Folder section, and adjust the following settings:
•
Share Name. If only one device is connected, the default share name is
USB_Storage. (Some router models include more than one USB port.)
You can click the name, or you can type it in the address field of your web browser. If
Not Shared is shown, the default share was deleted, and no other share for the root
folder exists. Click the link to change this setting.
•
Read Access and Write Access. Show the permissions and access controls on the
network folder. All–no password (the default) allows all users to access the network
folder. The password for admin is the same one that you use to log in to the router.
•
Folder Name. Full path of the network folder.
•
Volume Name. Volume name from the storage device (either USB drive or HDD).
•
Total Space and Free Space. Show the current utilization of the storage device.
Add a Network Folder on a USB Drive
You can edit network folders on the USB storage device.
To add a network folder:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
Nighthawk AC1750 Smart WiFi Router
Share USB Drives Attached to the Router
76
Hide quick links:
Advertisement
Table of Contents
