Breville BEF200 Instruction Booklet page 4

OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging
material or promotional stickers before
using your frypan for the first time. It is
recommended before the first use to wash your
frypan and lid in hot soapy water. Rinse and
dry thoroughly. Do not immerse the power
cord, power plug and/or temperature control
probe in water or any other liquid.
OPERATION OF YOUR FRYPAN
1. Insert the temperature control probe into
the probe socket on the appliance. Plug
power cord into a 230/240V power outlet
and switch ON. Always insert the probe
into the appliance first, then insert power
plug into power outlet.
NOTE
Before inserting the temperature control
probe into the probe socket; ensure the
interior of the socket is completely dry.
To do this, shake out excess water then
wipe the interior of the socket with a
dry cloth.
This frypan must be used with the
temperature control probe provided.
Do not use any other probe or connector.
2. Turn the dial on the temperature control
probe clockwise to the desired setting.
The red heating light on the probe
will illuminate.
3. The red heating light will remain
illuminated until the frypan reaches the
desired temperature. Once the temperature
has been reached, the red light will cycle
ON and OFF during cooking to maintain
the desired temperature.
6
4. When cooking is completed, turn the dial
anti-clock-wise until it is aligned with the
MIN. Switch off at the power outlet and
unplug power cord.
5. Leave the temperature control probe
connected to the appliance until cool.
6. Remove the temperature control probe and
follow the cleaning instructions to clean
the frypan (page 7).
NOTE
To adjust the steam outflow from the
frypan, turn the adjustable steam vent
attached to the knob on the glass lid.
USING THE PAN TILT LEVER
Pan tilt lever is located under the temperature
control probe. Pull lever away from base and
rest in upright position on bench top. This will
slope frypan to one side so that when sautéing
or roasting, oil/fats can collect in one area away
from food.
CARE & CLEANING
CARE
• Do not leave plastic cooking utensils in
contact with the hot frypan surface
while cooking.
• Do not use metal utensils on the non-stick
coating of the frypan. Only use wooden or
good quality plastic utensils to stir or
serve food.
• Before cleaning, switch the frypan to MIN
and unplug power cord from the power
outlet. Remove the temperature control
probe when cooled, from the probe socket
of the appliance.
CLEANING
Temperature control probe
• If cleaning is necessary, wipe the
temperature control probe over with a
slightly damp cloth. Ensure it is completely
dry before use.
NOTE
Never immerse the temperature control
probe, power plug or power cord in
water or any other liquid.
Non-stick cooking surface
Cooking on a non-stick surface minimises the
need for oil. As food does not stick, cleaning
is easier.
Any discolouration that may occur on the non-
stick surface may detract from the appearance
of the frypan but will not affect the cooking
performance.
Do not use metal (or other abrasive) scourers
when cleaning the non-stick coating. Wash
with hot soapy water. Remove stubborn spots
with a soft plastic washing pad or nylon
washing brush. Rinse and dry thoroughly.
Removing discolouration of the
non-stick surface
• Combine 2 tablespoons bicarbonate of
soda, ¼ cup household bleach, 1 cup water.
• Pour into the frypan, place lid on
with the vent closed, and simmer for
5–10 minutes.
• Clean in a well-ventilated area and avoid
breathing in the vapours. Wash as directed
before re-use. In some instances this may
not remove all the staining.
Glass lid
Wash the lid in warm soapy water using a soft
cloth or sponge, rinse and dry thoroughly.
Dishwasher safe
Your frypan and glass lid are dishwasher safe
for easy cleaning. Remove the probe and power
cord before placing frypan into the dishwasher.
NOTE
Before inserting the temperature control
probe into the probe socket, ensure the
interior of the socket is fully dry. To do
this, shake out excess water then
wipe the interior of the socket with
a dry cloth.
7