Kenmore 790.4802 Use And Care Manual page 10

Setting the Oven Controls
Setting Oven Lockout Feature
The I_ pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the oven from being turned on. it does not disable the clock, Timer or the interior oven lights.
INSTRUCTIONS PRESS DISPLAY
To activate the Oven Lockout feature
1. Press and hold _) for 3 seconds.
2. After 3 seconds a beep will sound, "Loc" will appear and "DOOR
LOCKED" will flash in the display. Once the oven door is locked
the "DOOR LOCKED" indicator will stop flashing (Fig. 1).
To reactivate normal oven operation:
1. Press and hold _T0_ for 3 seconds. A beep will sound. "Loc"
v
will clear. The "DOOR LOCKED" will continue to flash until the
oven door has completely unlocked (Fig. 2).
2. The oven is again fully operational.
s_P_ for 3
seconds
Fig. 2
Setting Temperature Display = Fahrenheit or Celsius:
The BROIL _ and FLEX CLEAN _ pads control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS PRESS DISPLAY
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
_ (Fig. and hold for 7 "550 °'`will first in
3)
seconds;
appear
the display and then beep will sound. If "F" appears, the
display is set to show temperatures in Fahrenheit (Fig. 4). If
"C" appears, the display is set to show temperatures in Celsius
(Fig. 5).
2. Press @ to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 4) or "C"
(Fig. 5).
3.
Press _.ART/._ t o accept the change or press _TOi_to reject the
change.
0
for 7seconds
Fig. 4
10