Honeywell HRGX45 User Manual page 124

124 | HRGX DVR User Manual
2.
3.
4.
5.
To restore the default OSD settings:
•
www.honeywell.com/security
Under OSD Configuration, configure the following settings:
• Camera
• Camera Name
• Display Name
• Display Date
• Display Week
• Date Format
• Time Format
• Display Mode
To adjust the location of the OSD text on the screen, using your mouse, drag the
highlighted text boxes to the desired locations on the preview window. The date/time text
box is highlighted yellow; the camera name text box is highlighted red.
To copy these settings to one or more additional cameras, click Copy to open the Copy to
window, select the camera(s) you want to copy the settings to, or click Analog to copy the
settings to all cameras, and then click OK.
Click Apply to save your settings.
In Menu > Camera > OSD, click Restore.
Select the camera you want to configure OSD settings for by
clicking a number from the drop-down list.
If you want, you can enter a descriptive name for the camera
(for example, "Front Door" instead of "Camera 01").
To display the camera name on screen, select the check box.
To hide the camera name, clear the check box.
To display the date on screen, select the check box.
To hide the date, clear the check box.
To display the day of the week on screen, select the check box.
To hide the day of the week, clear the check box.
Select format you want the date to be displayed in:
YYYY-MM-DD, MM-DD-YYYY, or DD-MM-YYYY format.
Select the format you want the time to be displayed in:
24-hour or 12-hour format.
Select one of the following display modes:
Transparent & Flashing, Transparent & Not Flashing,
Non-Transparent & Flashing, or Non-Transparent & Not
Flashing.