Maintenance; Sanding Operation - Makita BO5030 Instruction Manual

Random orbit sander
Hide thumbs Also See for BO5030:
Table of Contents

Advertisement

009095
Make sure that the logo on the cardboard lip and the
logo on the dust nozzle are on the same side, then
install the dust nozzle on the dust box.
Removing dust box and paper filter bag
2
1
009092
Remove the dust nozzle by pushing the two latches.
009093
Remove the paper filter bag first by pinching the logo
side of its cardboard lip, then by pulling the cardboard lip
downwards to move it out of the holding tab of the dust
box.
OPERATION

Sanding operation

009103
1. Dust box
2. Dust nozzle
1
2
1. Latch
2. Dust nozzle
CAUTION:
Never switch on the tool when it is in contact with
the workpiece, it may cause an injury to operator.
Never run the tool without the abrasive disc. You
may seriously damage the pad.
Never force the tool. Excessive pressure may
decrease the sanding efficiency, damage the
abrasive disc or shorten tool life.
Using the tool with the pad edge contacting the
workpiece may damage the pad.
Hold the tool firmly. Turn the tool on and wait until it
attains full speed. Then gently place the tool on the
workpiece surface. Keep the pad flush with the
workpiece and apply slight pressure on the tool.
CAUTION:
The sanding pad rotates clockwise during the
loaded
operation,
counterclockwise during the no-load operation.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized Service Centers, always using Makita
replacement parts.
ACCESSORIES
CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Abrasive discs
Paper dust bag
Paper dust bag holder
Dust box
Paper filter bag
7
but
it
may
rotate
or
attachments
Only use
accessory or
are

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bo5031

Table of Contents