Specifications - Makita BO5030 Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Orbits per minute (min
Dimensions (L x W x H)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Model
Paper size
-1
)
Net weight
Safety class
equipment and
environmentally compatible
BO5030
125 mm
12,000
153 mm x 123 mm x 153 mm
1.3 kg
END201-5
For Model BO5030
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Vibration
The vibration
determined according to EN60745:
Work mode : sanding metal plate
its
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For Model BO5031
Noise
The typical A-weighted noise level determined according
ENE052-1
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
ENF002-1
Vibration
The vibration
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
2
153 mm x 123 mm x 153 mm
/II
) : 80 dB(A)
pA
Wear ear protection.
total value (tri-axial
) : 4.5 m/s
h
2
) : 80 dB(A)
pA
Wear ear protection.
total value (tri-axial
) : 4.0 m/s
h
2
BO5031
125 mm
4,000 - 12,000
1.3 kg
/II
ENG104-2
ENG211-2
vector sum)
2
ENG104-2
ENG211-2
vector sum)
2
ENG901-1