Cisco 2600 Series Hardware Installation Manual page 37

Chapter 3 Installing the Router
Figure 3-1
Step 2 Place the router upside down on a smooth, flat surface.
Peel off the rubber feet from the black adhesive strip and place them adhesive-side down onto the five
Step 3
round, recessed areas on the bottom of the chassis. (See
Figure 3-2
OL-2171-02
Identifying the Rubber Feet
Rubber feet (5)
Black adhesive strip
Rubber Feet Location on Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series
Routers
Fan
Figure 3-2 and Figure
Cisco 2600 Series Routers Hardware Installation Guide
Setting Up the Chassis
3-3.)
3-3