Disassembly
Removing and Replacing the Keypad
44
1.
Remove the antenna, battery cover, battery, rear housing assembly, flex
connector, and transceiver board assembly as described in the procedures.
2.
Use the plastic tweezers to lift the keypad from the front housing as shown in
Figure 25.
Figure 25. Removing the Keypad
3.
To replace, insert the keypad into the front housing, ensuring the keys align
properly with the openings in the front housing.
4.
Replace the transceiver board, rear housing assembly, antenna, battery, and
battery housing as described in the procedures.
June 07, 2004
A840
032220o
6809485A78-O