Disassembly
Removing and Replacing the Keypad
28
1.
Remove the battery cover, battery, memory card, rear housing assembly, and
transceiver board assembly as described in the procedures.
2.
Lift one arm of the battery retention chassis (BRC) from between the front
housing wall and screw boss.
3.
Ensure the bent tabs on the arms are released from the slots in the front
housing chassis. Similarly, remove the BRC arm from the other side (see
Figures 15 and 16).
Battery retention
chassis arm
Figure 15. Removing the Battery Retention Chassis Arm
September 12, 2007
MOTORAZR 2 V9
v498200
6809513A83-O