Magnetic Wand Activation; Operation Mode Structure - Honeywell Sensepoint XCD Technical Manual

Sensepoint XCD Technical Manual

8.3 Magnetic Wand Activation

The magnetic wand is used as a tool to allow the user
to communicate with the Sensepoint XCD transmitter.
Communication with the XCD is achieved by positioning
the Magnetic Wand at one of three different positions on
the front glass window of the Sensepoint XCD transmitter.
Activation of the switches is verified by observing
the Magnetic Wand Activation Icon on the LCD display
Hold the Magnetic Wand in position for up to 2 seconds
Hold the Magnetic Wand in position for 3 seconds or more
t
8.4 Mode Struc ure
Sensepoint XCD has 3 operating modes.
1. Monitoring mode, is the normal operating status while XCD measures and displays
gas concentration. The fault/warning status is periodically checked, relay contacts
are activated according to the configuration.
2. Configuration mode, this mode allows parameters relating to the configuration of
the Transmitter functions to be changed according to specific needs. This mode can
be protected by a password mechanism to prevent unauthorised changes being
made.
3. Review mode, allows the user to view the current configuration settings.
Configuration
Mode
Further details of the information available and configuration options for the Sensepoint
XCD can be found in Section 13. of this manual.
Start - Up
Monitoring
Mode
Diagram 12: Mode Structure
23
SPXCDHMANEN Issue 2
=
=
Review
Mode