The Omnii Xt15F Hand-Held Computer (Model 7545Xt - Motorola 7545MBW User Manual

The Omnii XT15f Hand-Held Computer (Model 7545XT)

NOTE
Performance specifications are nominal and subject to change without notice.
The Omnii XT15f is a modular, industrial hand-held computer suitable for cold chain and extreme weather envi-
ronments. These units are equipped with heating hardware to prevent condensation from developing on or
inside the Omnii.
Two variants are available – the Chiller and the Arctic. The Chiller model is condensing-resistant, and the
Arctic model is condensing-free. This variant is equipped with a heated scanner window and a standard 5000
mAh battery (model number ST3001). An optional freezer battery (model number ST3002) can be ordered for
the Chiller variant. The Omnii Arctic freezer variant is equipped with an optically bonded heated display
module, providing a condensation-free unit. It is only available with an ST3002 freezer battery.
NOTE
The Omnii Hand-Held Computer is a body worn device, and to maintain compliance
with the FCC RF exposure guidelines, use a Motorola approved carrying case. Use
of non-approved accessories may violate FCC RF exposure guidelines.
Model Variants
• Omnii XT15f Arctic Hand-Held Computer (extremely rugged, condensing-free) - Model 7545XT. This
model features a multi-core heater control logic board that dynamically heats the scan window and
LCD display.
• Omnii XT15f Chiller Hand-Held Computer (extremely rugged, condensing-resistant) - Model 7545XT. This
model features a single core heater control logic board dynamically heats the scan window.
Omnii XT15f Freezer Variants
Figure F-6
Alphanumeric
Omnii XT15f Freezer Variants F - 3
Numeric