MN002347A01-B
Chapter 3: Using the LEX Series Device
Return to Process
Folders
on page 82
3.10.3
Removing a Folder
When and where to use: When a folder is no longer needed, you can remove it. Use this procedure to
remove a folder.
Procedure:
1 Tap and hold the folder until it enlarges and the device vibrates.
2 Drag the folder to X Remove until the folder turns red; then release.
The folder is removed from the screen.
Return to Process
Folders
on page 82
3.11
Accessing Files from a Computer
When and where to use: Use this procedure to allow access to files from your computer using MTP
(media device) or using PTP (camera software).
Procedure:
1 Connect the device to your computer using a USB cable.
If one of the following messages is displayed in the notification area (top of screen): Connected
as a media device or Connected as a camera, you already have access to the files on your
device.
2 Swipe down from the Status Bar.
84
Send Feedback