Related Manuals for Kenwood KHG 601
Summary of Contents for Kenwood KHG 601
- Page 1 BUILT-IN COOKING HOBS KHG 601, KHG 602 models Instructions for use - Installation advice Before operating this hob, please read these instructions carefully...
-
Page 2: Table Of Contents
CONTENTS Page Number Introduction ..........Important Safety Precautions &... -
Page 3: Introduction
Dear Customer, Thank you for purchasing the Kenwood KHG 601, KHG 602 built-in cooking hobs. The safety precautions and recommendations listed below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance. -
Page 4: Important Safety Precautions & Recommendations
IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS IMPORTANT: This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment. The appliance guarantee will be void if the appliance is used within a non domestic environment i.e. - Page 5 • Do not use the appliance whilst in barefoot. • If you should decide not to use this appliance any longer (or decide to substitute another model), before disposing of it, it is recommended that it be made inoperative in an appropriate manner in accordance to health and environmental protection regulations, ensuring in particular that all potentially hazardous parts be made harmless, especially in relation to children who could play with unused appliances.
-
Page 6: Features
1 - FEATURES Fig. 1.1 Mod: KHG 601 Fig. 1.2 Mod: KHG 602 This appliance is Class 3 This appliance is Class 3 GAS BURNERS Auxiliary burner (A) 1,00 kW Semirapid burner (SR) 1,75 kW Rapid burner (R) 3,00 kW... -
Page 7: How To Use The Cooktop
2 - HOW TO USE THE COOKTOP GAS BURNERS Gas flow to the burners is adjusted by turning the knobs (illustrated in figs. 2.1) which control the valves. Turning the knob so that the indicator points to the symbols printed on the panel achieves the following functions: –... - Page 8 (1) with grill for small cookware: minimum AUXILIARY GRATE FOR SMALL diameter 6 cm (only for model KHG 601) PANS - Only for the m odel KHG 601 (2) only for model KHG 602 (fig. 2.3)
- Page 9 CORRECT USE OF THE TRIPLE-RING BURNER Only flat bottom pans of the correct size are to be placed on the pan support above the Triple-ring burner. When using a WOK, the supplied wok stand must be placed onto the pan stand to avoid any faulty operation of the triple-ring burner (fig. 2.5a). The wok should not be placed directly onto the pan support without the use of the supplied wok stand (fig. 2.5b).
-
Page 10: Cleaning & Maintenance
3 - CLEANING AND MAINTENANCE GENERAL ADVICE CLEANING Before you begin cleaning, you • Stainless steel hob: Spillage on • must ensure that the appliance is the hob can usually be removed by switched off at the cooker switch. a damp soapy cloth. More obstinate •... - Page 11 BURNERS AND GRIDS GLASS LID • These parts can be removed and (Optional) Models with glass lid cleaned with appropriate products. • After cleaning, the burners and their flame spreaders must be well dried and correctly replaced. • It is very important to check that the burner flame spreader and the cap have been correctly positioned.
- Page 12 Fig. 3.1 Fig. 3.2 Fig. 3.3 Fig. 3.4 Fig. 3.5...
-
Page 13: Advice For The Installer
Advice for the installer IMPORTANT • The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment. Your product will not be guaranteed if installed in any of the above environments and could affect any third party or public liability insurances you may have. -
Page 14: Installation
4 - INSTALLATION TECHNICAL INFORMATION FOR THE INSTALLER In order to install the cooker top into the kitchen fixture, a hole with the dimensions shown in fig. 4.2 has to be made, bearing in mind the following: • If the cooktop is not installed directly above an oven and/or if its base is accessible through a cupboard or drawer space... - Page 15 FASTENING THE INSTALLATION BRACKETS (figs. 4.4, 4.5, 4.6) • Each cooker top is provided with an installation kit including brackets and screws for fastening the top to fixture panels from 2 to 4 cm thick. • Turn the cooker top upside down and fasten the brackets “F and R” to the appropriate socket holes, without tightening the screws “B” for the moment. •...
-
Page 16: Provision For Ventilation
PROVISION FOR VENTILATION • The appliance should be installed into a room or space with an air supply in accordance with the current version of BS 5440-2: 2000. • For rooms with a volume of less than 5m - permanent ventilation of 100 cm free area must be provided. -
Page 17: Gas Installation
5 - GAS INSTALLATION IMPORTANT NOTE This appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation label attached on the appliance). • Appliances supplied for use on NATURAL GAS are adjusted for this gas only and cannot be used on any other gas (LPG) without modification. The appliances are manufactured for conversion to LPG. - Page 18 GAS CONNECTION GB IE Cat: 2H 3+ Installation to Natural Gas Installation to Natural Gas must conform to the Code of Practice, etc. The supply pressure for Natural Gas is 20 mbar. The installation must conform to the relevant British/European Standards. Installation to LP Gas When operating on Butane gas a supply pressure of 28-30 mbar is required.
- Page 19 The fitting (fig. 5.1) is made up of: 1/2" BSPP (G) parallel 1/2" BSPP (G) parallel – 1 nut “A” (ISO 228-1) male (ISO 228-1) female – 1 elbow fitting “C” – gasket “F” Connection to the Gas Supply – Be careful when flexible pipes are used that they do not come into contact with moving parts. –...
- Page 20 REPLACEMENT OF THE INJECTORS Auxiliary, If the injectors are not supplied they can semirapid and be obtained from the After-Sales Service. rapid burners Select the injectors to be replaced according to the “Table for the choice of the injectors”. nozzle diameters, expressed hundredths of a millimetre, are marked on...
- Page 21 TABLE FOR THE CHOICE OF THE INJECTORS GB IE Cat: 2H 3+ Natural Gas G30/G31 Nominal Reduced 28-30/37 mbar 20 mbar BURNERS Power Power [kW] [kW] Ø injector Ø injector [1/100 mm] [1/100 mm] Auxiliary (A) 1,00 0,40 Semirapid (SR) 1,75 0,45 Rapid (R)
-
Page 22: Electrical Installation
6 - ELECTRICAL INSTALLATION IMPORTANT: The appliance must be installed by a qualified technician according with the current local regulations and in compliance with the manufacturer instructions. Incorrect installation might cause harm and damage to people, animals or objects, for which the manufacturer accepts no responsibility. Connection to a good earth wiring system is absolutely essential. The manufacturer accepts no responsibility for any inconvenience caused by failure to comply with this rule. - Page 23 Important The wires in the mains lead on this appliance are coloured in accordance with the following code: Green and Yellow - Earth Blue – Neutral Brown – Live As the colours may not correspond with the markings identifying the terminals in your plug proceed as follows: –...
-
Page 24: Guarantee & After Sales Service
7 - GUARANTEE Your new “KENWOOD” product comes with 12-month guarantee covering all parts and labour. If your appliance proves to be defective as a result of faulty materials or workmanship during the guarantee period, these parts will be repaired or replaced free of charge. - Page 28 The manufacturer cannot be held responsible for possible inaccuracies due to printing or transcription errors in the present booklet. The manufacturer reserves the right to make all modifications to its products deemed necessary for manufacture or commercial reasons at any moment and without prior notice, without jeopardising the essential functional and safety characteristics of the appliances. Code: 1103859 - ß4...