Fan Operation - Haier AU282AHBEA Service Manual

TEMP
ON
OFF
FAN
HEALTH
1
5 4
MODE
SLEEP SWING
CLOCK SET
TIMER
POWER/SOFT
HEAT
LIGHT LOCK
RESET
TEMP
ON
OFF
FAN
HEALTH
1
4
MODE
SLEEP SWING
CLOCK SET
TIMER
POWER/SOFT
HEAT
RESET LIGHT LOCK
Press FAN button. For each press, fan speed changes as follows:
4
LOW
Unit runs at the speed displayed on LCD.
In DRY mode, when room temp.becomes 2 C lower than temp. setting,unit will run
intermittently at LOW speed regardless of FAN setting.
Press ON/OFF button
5
Unit stops running, and when
entering this mode for the next
time, it will show the previous setting

Fan operation

Press ON/OFF button
1
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,operation mode
2
changes as follows:
Remote
AUTO COOL
controller
Select Fan operation shows "
Press FAN button. For each press, fan speed changes as follows:
3
LOW
Unit runs at the speed displayed on LCD.
Press ON/OFF button
4
Unit stops running, and when entering this mode for the next time, it will
show the previous setting.
Note:
In this mode, temp. can't be selected, temp.setting will not be
shown in LCD display.In Fan operation mode, "AUTO" fan
speed is not available. Operation cycles are as follows:
LOW
>a__WcU[S^ <[c >a`V[e[a`Wc
MID HIGH
DRY FAN HEAT
", Fan operation starts.
MID HIGH
MID HIGH
-92-
AUTO
COOL operation starts when room
temp. is higher than temp. setting.
Ultra-low air flow
Temp.setting+2 C
Temp.setting
On reaching 2 C lower than temp.
setting,unitwill run in mild DRY mode.