Heating Mode - Haier AU282AHBEA Service Manual

Heating Mode

Note: For cooling only type, this function is invalid.
TEMP
ON
OFF
HEALTH
1
5
MODE
SLEEP SWING
CLOCK
TIMER
LIGHT
RESET
Press ON/OFF button
4
Unit stops running, and when entering this mode for the
next time, it will show the previous setting.
Note:
In this mode, temp. can't be selected, temp.setting will not be
shown in LCD display.In Fan operation mode, "AUTO" fan
speed is not available. Operation cycles are as follows:
Press ON/OFF button
1
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,operation mode
2
changes as follows:
AUTO COOL
FAN
Select Heating operation "
operation starts.
SET
Select temp. button
3
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
HEAT
Every time the button is pressed, temp. setting decreases 1 C
LOCK
If the button is kept pressed, setting will increase or
decrease quickly.
Press FAN button. For each press, fan speed changes as
4
follows:
In heat mode,warm air will blow out after a short period of
time due to cold-draft prevention function.
Press ON/OFF button
5
Unit stops running, and when entering this mode for the next
time, it will show the previous setting.
>a__WcU[S^ <[c >a`V[e[a`Wc
LOW MID HIGH
DRY FAN
LOW MID
-100-
HEAT
" appears and Heating
HIGH AUTO