Panasonic KX-TDA15 User Manual page 116

1.7.2 Refusing Incoming Calls (Do Not Disturb [DND])
•
The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: FWD mode
Flashing red slowly: DND mode
•
The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
(1) When in FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as shown
below:
(2) When in FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status allows you to switch the FWD/
DND status and set the FWD destination (refer to "
Fixed FWD/DND Button").
Note
•
If your extension has set this feature, a calling extension will hear DND tone.
•
If this feature is set, the Call Forwarding (FWD) feature does not work.
•
Specified extensions can override this feature and call DND extensions (DND Override).
•
When intercom calls are set to be handled differently from outside calls (DND set/cancel), we
recommend establishing buttons for both FWD/DND—Outside calls and FWD/DND—Inter-
com calls, because:
a.
b.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons.
116 User Manual
FWD DND
A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
the light patterns of the FWD/DND—Both calls button (including FWD/DND button [fixed
button]) will indicate the setting for either outside calls or intercoms calls, but not both.
Note
The DND icon on PS display reflects the setting for outside calls only.
pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button]) will
not change the FWD or DND mode for intercom calls and outside calls separately.
Off
Switching FWD/DND Status Using