AEG DDLE Basis 11 Operating And Installation Instructions page 8

Electronically controlled instantaneous water heater

Hide thumbs Also See for DDLE Basis 11:

Table of Contents

the risk of frost, as water residues remain inside the device.

Water installation:

Steel, copper or plastic pipework.

Copper or plastic pipework*.

* The instantaneous water heater can reach operating temperatures up to 60°C. In case of faults, loads

up to 95 °C / 1.2 MPa can occur temporarily in the installation. The plastic pipework used must be suitable

for such temperatures/pressure.

Electrical installation:

all poles with at least 3 mm contact separation.

(

19).

For contractors

Table of Contents

Show Quick Links

Table of Contents

Ddle basis 18 Ddle basis 21 Ddle basis 13 Ddle basis 24 Ddle basis 27