Location Of Controls - JVC TV-20F243 User Manual

LOCATION OF CONTROLS

FRONT
1
2 3 4 5 6 7
ON TIMER
REC REC TIMER
STOP/EJECT REW PLAY
POWER
14 15
FRONT:
1. Cassette Loading Slot - To insert or remove a video tape.
2. Remote Sensor - Signals from the Remote Control are
received here.
3. REC Indicator - Lights when the TV/VCR is recording.
4. ON TIMER Indicator - This indicator lights up when the
powered up. It also lights up when ON TIMER program
is turned ON while power is OFF.
5. STOP/EJECT Button - Press once to stop the tape in
any mode. Press again to eject the tape.
6. REW (Rewind) Button - In the Stop mode, this button
rapidly winds the tape backwards. In the Play mode,
this button activates reverse search.
7. PLAY Button - Press to play a prerecorded tape.
8. FF (Fast Forward) Button - In the Stop mode, this
button rapidly winds the tape forward. In the Play mode,
this button activates forward search.
9. REC / ITR Button - Press once to start normal recording.
Additional presses activate Instant Timer Recording.
10. CHANNEL + / – Buttons - Press to select a channel for
viewing or recording.
8
DOOR
8 9 10 11
REC / ITR
FF
– + – + VIDEO L
CHANNEL VOLUME
DESCRIPTION OF CONTROLS
REAR
12 13
HOW TO OPEN THE FRONT DOOR
– AUDIO–R
(MONO)
LINE IN
11. VOLUME + / – Buttons - Press to raise or lower the
volume of the sound.
12. AUDIO (L/R)/VIDEO IN Jacks - Audio and video signal
cables from an external source can be connected here.
13. Headphone Jack - Plug headphones with an 1/8" miniplug
into this jack for private listening.
14. POWER Button - Press to turn the TV/VCR on or off.
15. REC TIMER Indicator - This lights when the TIMER
button is pressed.
REAR:
16. UHF/VHF Antenna Jack - Connect the 75 ohm coaxial
cable from the antenna or Cable TV service to this jack.
17. AC Power Cord - Connect to a 120V, 60Hz outlet.
16 17