Minimum Flow Adjustment For Hob Gas Taps - Baumatic BCG925SS User Manual

LPG -
Butane
Ultra-rapid
LPG -
Propane
Natura l
LPG -
Butane
Oven
LPG -
Propane
Natural

Minimum flow adjustment for hob gas taps.

All work must be carr
r egistered engineer.
o Light the
o Remove the knob from the tap. The adju
o Place a sm
o Unscrew the adjusting screw, in order to increase the
tighten the adjusting screw to decrease the gas flow.
o The correct adjust
about 3 – 4 mm.
o For butane/p ropane gas, the adjusting screw must be tightly
screwed in.
Refit the control knob.
o
o Make sure that the flame does not go out by quickly turning from
maximum flow to minimum flow. If it does then remove the control
knob and make further adjustments to
once the adjustment has been made.
IMPORTANT: On completion carry out a gas tightness test.
o
28-30 276
37 272
20 362
28-30 284
37 279
20 371
ied out by a GASSAFE
burner and set the knob at the minimum
position.
screw is located beside the valve body.
all bladed screwdriver in the centre of the
tap shaft.
ment is obtained when the flame has a length of
35
98 1600 3800
98 1600 3800
1 35-K 1600 3800
94 1000 3900
94 1000 3900
142 1000 3900
stment
gas flow or
the gas flow, testing it again
62
52