Table of Contents
Advertisement
with a certificate signed by the authority listed in
the Network Certificate Authority drop-down list.
(recommended)
Enter the domain name of the server from which
the client will accept a certificate in the Specific
Server or Domain field.
The Login Name used for PEAP tunnel
authentication fills in automatically as
PEAP-XXXXXXXXXX, where XXXXXXXXXX
is the computer's MAC address. Change the Login
Name if needed.
LEAP:
Specify a user name and password:
Click Use Temporary User Name and Password
radio button. Select Automatically Prompt for
User Name and Password or select Manually
Prompt for LEAP User Name and Password
radio button to manually login and start the LEAP
authentication process. This will result a prompt
window when the profile is activate asking user to
input user name and password.
or
Click Use Saved User Name and Password by
choosing the radio button. Specify the LEAP user
name, password, and domain to save and use.
If desired, check No Network Connection Unless User
Is Logged In to force the Wireless Adapter to
disassociate after logging off (default). Enter the LEAP
Authentication Timeout Value (between 30 and 500
seconds) to specify how long LEAP should wait before
declaring authentication failed, and sending an error
message. The default is 30 seconds.
EAP-FAST:
Specify a user name for EAP authentication:
33
Advertisement
Table of Contents
