Table of Contents
Advertisement
To connect to an existing network, an Infrastructure or an Ad-Hoc network, you should
manually create a profile and assign the information of the network.
Follow the steps below.
1.
Click Profile Management tab.
2.
Click Scan. The Available Infrastructure and Ad Hoc Networks list will show all
available wireless networks (identified by SSID) in the neighborhood. On this list,
click Refresh to refresh the list at any time.
Highlight a Network Name (SSID) and click the Activate button to connect an
3.
available network.
If no configuration profile exists for that network, the Profile Management window
4.
will open the General tab. Fill in the profile name and the information for this
network settings in General, Security and Advanced tabs. Click OK to create the
configuration profile for that network. Contact the network administrator if
necessary.
Notice:
For detailed information of connecting, please read the following
step-by-step instruction.
For details of each tab in Vigor600 Super G Wireless Adapter Utility,
please refer to Chapter 4.
5.
Once connected, the tray icon will become
check the connection status.
This section will guide you to connect to an existing network step by step.
1.
Open the main window of the utility, and click Profile Management tab.
-
.
-
.
16
. You can click Current Status tab to
Advertisement
Table of Contents
