Network; Ddns Register; Client Access - Samsung SRV-940 User Manual

Chapter 5. Configuration

5.7 NETWORK

5.7.1 NETWORK
Set the necessary items for network connection to a computer.
· NETWORK TYPE [ADSL/LAN/DHCP] : Selects the network type to connect to a computer.
· IP ADDRESS : Enters the [IP ADDRESS] that the relevant Internet service provider assigns to a user.
· SUBNET MASK : Enters the [SUBNET MASK] address that the relevant Internet service provider assigns
to a user.
· GATEWAY : Enters the [GATEWAY] address that the relevant Internet service provider assigns to a user.
· DNS : Enters the [DNS] address that the relevant Internet service provider assigns to a user.
· ID : Enters a User ID registered with the relevant service provider.
· PW : Enters a User Password registered with the relevant service provider.
· DDNS SERVER ON/OFF : When the DVR is connected to a dynamic IP, the IP address changes every
time it attempts to connect to the ISP. In this case, there is no way for a user
to know the changed IP address. If a DVR that uses a dynamic IP address is
registered with its domain name, the domain name can easily be found and
can be connected even if the IP changes.
DDNS SERVER DOMAIN ADDRESS : Input the domain address of the DDNS
· ID : Input the registered ID at www.samsungipolis.com .
· PW : Input the registered PW at www.samsungipolis.com .

5.7.2 DDNS Register

1) Users can set the DDNS in the setup menu of the SVR-440/940 as below. Select the Network menu
and the following screen is displayed. Set [SWR] to [ON]
Digital Video Recorder 52
SERVER that it is using.
User's Manual
Chapter 5. Configuration
This is all about DDNS setup in the DVR unit.
2) After finishing the above step, please take the next step with the DDNS server. Please refer to Chapter
5.8 DDNS Registration.

5.7.3 Client access

· PORT : When connecting to a PC, the ports can be changed.
To connect the SVR-450 to a router, all three ports need to be set..
Default setting port on DVR: Control – Connect, PTZ, Events and other control data
Default setting port +1: VIDEO
Default setting port +2: AUDIO
For example) Default setting port on DVR: 3495
Setting port for VIDEO: 3496
Setting port for AUDIO: 3497
· CLIENT ACCESS : Set the Network access password.
· BANDWIDTH SAVING : Select Bandwidth Saving ON, and frame rate transmission reduces to 1fps.
Digital Video Recorder 53 User's Manual