Power Connection; Live Monitoring Screen; Function Of Screen Display; Automatic Channel Rotation - Samsung SRV-940 User Manual

Chapter 4. Operating
Video mode
SETTING
NTSC PAL
O X
Factory Default
X O
* The factory default is set to NTSC video mode and VGA video output.

4.2 Power connection

· After power is connected to the rear connector of the system, the system will be powered on.
· When power is turned on, the system will detect a video signal automatically.
· Despite of a power failure, all the setting values will preserve.

4.3 Live monitoring screen

When the system is turned ON, the live monitoring screen is displayed.
Digital Video Recorder 26
Video output
BNC VGA
X O
X O
User's Manual
Chapter 4. Operating

4.3.1 Function of screen display

When Channel number buttons 1 ~ 4 (SVR-450) / 1 ~ 9 (SVR-940) are pressed, each channel is dis-
played in full screen.
Press the ENTER button, and the four connected channels are displayed in quad split screen

4.3.2 Automatic channel rotation

When the AUTO button is pressed in each full screen mode, each channel is rotated automatically
following the setting in [SCREEN SETUP] > [Auto Sequence]. (SEQUENCE must be set to [YES].)
When AUTO is pressed again, the Auto sequence operation will be canceled.
Digital Video Recorder 27 User's Manual