Chapter 4. Operating; Checklist Before Operation - Samsung SRV-940 User Manual

Chapter 3. Installation
SVR-940
No. Description
1 TX+(Transmit Data)
2 TX-(Transmit Data)
3 RX+(Transmit Data)
4 N/C(No connection)
Monitor Output (VGA)
This is the output connector for a VGA Monitor.
SVR-450
SVR-940
Digital Video Recorder 24
No. Description
5 N/C(No connection)
6 RX-(Receive Data)
7 N/C(No connection)
8 N/C(No connection)
User's Manual
Chapter 3. Installation
No. Description
1 Red Signal (75, 0.7Vp-p)
2 Green Signal (75, 0.7Vp-p)
3 Blue Signal (75, 0.7Vp-p)
4 N/C(No connection)
5 Ground
6 Ground
7 Ground
8 Ground

Chapter 4. Operating

4.1 Checklist before operation

Users must select the video mode (NTSC or PAL) and video output (BNC or VGA) before powering the
system on. These can be selected from the switches on the rear of the DVR system.
The settings of the video mode and video output are as described below.
Video mode
SETTING
NTSC PAL
O X
X O
Digital Video Recorder
No. Description
9 N/C(No connection)
10 Ground
11 Ground
12 N/C(No connection)
13 HSYNC (Horizontal Synchronization)
14 VSYNC (Vertical Synchronization)
15 N/C(No connection)
Video output
BNC VGA
O X
O X
25 User's Manual