Xstatus Elements; Command Reference — Xstatus - Cisco TelePresence Video Communication Server Administrator's Manual

Command reference — xStatus
The xStatus group of commands are used to return information about the current status of the
system. Each xStatus element returns information about one or more sub-elements.
The following section lists all the currently available xStatus commands, and the information that is
returned by each command.
To obtain information about the existing status, type:
xStatus to return the current status of all status elements
n
xStatus <element> to return the current status for that particular element and all its sub-
n
elements
xStatus <element> <sub-element> to return the current status of that group of sub-
n
elements
To obtain information about the xStatus commands, type:
xStatus ? to return a list of all elements available under the xStatus command
n

xStatus elements

The current xStatus elements are:
Alternates
n
Applications
n
Calls
n
Ethernet
n
ExternalManager
n
Feedback
n
FindMeManager
n
H323
n
IP
n
LDAP
n
Links
n
Loggers
n
NTP
n
Options
n
Pipes
n
Policy
n
Registrations
n
ResourceUsage
n
SIP
n
SystemUnit
n
TURN
n
Warnings
n
Zones
n
Each element has the sub-elements as described below:
Alternates
Alternates:
Peer [1..6]: {Hidden for Peer [n] when Peer [n] is
self}
Status: <Active/Failed/Unknown>
Cause: {visible if status is Failed} <No response
Cisco VCS Administrator Guide (X6.1)
Reference material
Page 372 of 401