Assembling The Oil Pan - Yamaha F50F Service Manual

BRKT

Assembling the oil pan

1. Install a new gasket 1 onto the exhaust
guide 2.
1
2
2. Install the oil strainer 3, a new gasket,
and the housing onto the exhaust guide,
and then tighten the bolts to the specified
torque.
3
a
NOTE:
Align the projection a of the oil strainer with
the rib of the housing.
7-19
Bracket unit
S6C17140
S6C17150
S6C17160
Oil strainer bolt:
10 N·m (1.0 kgf·m, 7.4 ft·lb)
3. Install the oil pan 4, and then tighten the
bolts finger tight.
4. Install a new gasket, the exhaust mani-
fold 5, and the bolts, and then tighten
the bolts finger tight.
5. Tighten the exhaust manifold bolts 6,
then the oil pan bolts 7, and then tighten
them to the specified torques.
4
LT LT
572
6
Exhaust manifold bolt 6:
10 N·m (1.0 kgf·m, 7.4 ft·lb)
Oil pan bolt 7:
27 N·m (2.7 kgf·m, 20.0 ft·lb)
6. Install the cooling water pipe 8 into the
plate 9.
7. Install a new gasket, the plate 9, a new
gasket, the muffler 0, and the bolts into
the oil pan, and then tighten the bolts to
the specified torque.
LT LT
572
7
5
A A
SC617170
6C13G11