Checking The Lower Case; Assembling The Oil Seal Housing; Assembling The Lower Case - Yamaha F50F Service Manual

Checking the lower case

1. Check the skeg and torpedo for cracks or
damage. Replace the lower case if nec-
essary.

Assembling the oil seal housing

1. Apply grease to new oil seals, and then
install them into the oil seal housing.
Needle bearing attachment 1:
90890-06653
Driver rod L3 2: 90890-06652

Assembling the lower case

1. Install the shift rod assembly 1 and shift
cam 2 as shown.
NOTE:
Install the shift cam with the "UP" mark a
facing upward.
6C13G11
2. Install the needle bearing into the lower
2
1
A A
NOTE:
• Install the needle bearing with the manufac-
ture identification mark b facing up.
• When using the driver rod, do not strike the
special service tool in a manner that will
S6C16200
force the stopper c out of place.
Drive shaft and lower case (F50, F60)
case to the specified depth.
Driver rod SL 3: 90890-06602
Needle bearing attachment 4:
90890-06614
Bearing depth plate 5: 90890-06603
Depth d:
182.75 ± 0.25 mm
(7.195 ± 0.010 in)
1
2
3
4
5
6
7
8
9
6-16