o
Cl
Cl
Cl
A
I
•
TURN OFF THE MACHINE (A), then place the machine
in the location where you will use it, and turn on it.
TheOCllllUt!II~hasbeentafCllMed
rUTIoflhPR*'!J.li&comectlheUS8ableltwiCCIMeCUIhepne.~
1he~.a1dplooelheprierwher&}OOU""beUllr'9~l'-t."'"orl
Iheprrter.-dci:::kjN_1
Toched:;the~led:s.c:id(\li8l¥S~Red.tl
~-+-i-t!o
USB
• To change the port name, click View Setup Results, then click Set Port Name. For details, refer to "8 Changing
the port name" in the printed manual: Network Setup Troubleshooting.
• If Unsafe Removal of Device is displayed, click OK.
• •
It
•
•
When the Setup Completion dialog box appears, remove the USB cable, then click Next.
• •
I
I
Iw
_
•