5. Adjustment
5-1 Step of Into Service mode
To enter the service mode (Expert) take the one of the following methods.
-
Press the "Menu" key on the projector for more than 10 seconds and then press the "Select" key
Step1
on the projector for more than 10 seconds.
Press and hold the "Menu" key on the remote control for more than 20 seconds.
-
To return to the normal mode, press the "Power ON/Standby" key.
Open Main menu and select "Expert " item to enter
Step2
the expert menu as right side picture.
- 44-
PDG-DXT10L