Recording Other Sources Onto An Md - JVC 0803AIMMDWJEM Instructions Manual

Recording Other Sources onto an MD

1
Prepare the source to record from.
To record from FM/AM broadcasts:
1) Press FM/AM/AUX (or FM/AM on the unit) to
select either "FM" or "AM."
FM/AM
/AUX
(On the remote control)
2) Tune in to a preset station you want (see page 14).
To record from a tape:
1) Insert a cassette into the cassette loading slot.
• If the current playing source is not "TAPE," press
TAPE 2 3, then 7 before going to the next step.
2) Press REV.MODE to select Reverse
Mode (see page 26).
To record from external equipment:
Press FM/AM/AUX (or AUX/DVD on the unit) to select
"AUX" and prepare the external equipment to play.
FM/AM
/AUX
(On the remote control)
• Adjust the audio input level if necessary (see page 27).
• For operation of the external equipment, see the
manuals supplied with it.
2
Insert a recordable MD into the MD loading
slot.
• Set the MD recording length mode, "LP:"-prefix
addition mode, and group recording mode (see "Setting
MD Recording Modes" on page 30).
On the remote control ONLY:
3
Press CD REC MODE to select
track mark entry mode.
• Each time you press the button, entry mode
alternates between auto and manual entry:
MANUAL TRK REC
MANUAL TRK REC: Separates tracks manually by
AUTO TRK REC:
* See "About the track marks" on page 28 for details.
AUX/DVD
FM/AM
(On the unit)
REV.
MODE
AUX/DVD
FM/AM
(On the unit)
CD REC
MODE
AUTO TRK REC
adding track marks at the places
where you want.
• Press SET to add a track mark
while recording.
The unit automatically separates
and put a track mark if there is a
silence of 3 seconds or more
between tracks.
• By pressing SET, you can also
enter a track mark manually.
4
Press MD REC.
The REC (MD recording) indicator starts
flashing on the display.
When the source is "FM" or "AM," recording starts.
When the source is "TAPE," playback and recording
starts—Synchronized Recording.
When the cassette player stops, recording also stops
automatically.
When the source is "AUX," starts playback after "AUX
= MD" appears on the display.
MD TAPE
REC LP 2
x 1
GROUP
Ex.: When recording a tape using LP2 and Group recording.
To stop recording, press 7.
"WRITING" flashes on the display and the unit beeps for a
while if the key-touch tone is activated (see page 10).
When recording from the external equipment
Recording starts automatically when the source sound comes into the unit,
and stops automatically if no sound comes into the unit for about 30 seconds
(Sound Synchronized Recording).
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA.
• Each time you press the button, the
information on the display changes as
follows:
Source indication
SP
MD
REC
x 1
GROUP
Remaining recording time
SP
MD
REC
x 1
GROUP
MD track number
Ex.: When you record an FM broadcast.
* When group recording is not activated, "– –" will appear on the display.
MD
REC
DISP/CHARA
MD group number*
32