Repeating Tracks-Repeat Play; Searching For Tracks To Play-Md Title Search - JVC 0803AIMMDWJEM Instructions Manual

To go to another track in the same group, press ¢ or
4 repeatedly.
• ¢: Skips to the beginning of the next or succeeding
tracks in the same group.
• 4: Goes back to the beginning of the current or previous
tracks in the same group.
To go to another group, press GROUP SKIP ¢ or
GROUP SKIP 4 repeatedly while holding SHIFT during
Group Play.
• GROUP SKIP ¢: Skips to the first track in the next or
succeeding groups.
• GROUP SKIP 4: Goes back to the first track in the
current or previous groups.
To stop during play, press 7.
To exit from Group Play, before or after play, press PLAY
MODE repeatedly so that the unit enters another play mode
(Normal Play, Program Play, or Random Play).
• Turning off the unit also cancels Group Play and changes
the playback mode to Normal Play.
Repeating Tracks—Repeat Play
You can have all the tracks, the program, the individual track
or group currently playing repeat as many times as you like.
On the remote control ONLY:
Press REPEAT during or before play.
• Each time you press the button, Repeat Play
changes as follows:
MD REPEAT ALL
( ALL)
MD REPEAT OFF
(canceled)
• MD REPEAT ALL:
For Normal Play or Random Play:
Repeats all the tracks on the MD.
For Group Play:
Repeats all the tracks in a group.
For Program Play:
Repeats all the tracks in the program.
• MD REPEAT 1: Repeats one track.
• MD REPEAT OFF: Cancels Repeat Play.
Ejecting the MD or turning off the
unit will also cancel the Repeat Play.
To stop during play, press 7.
REPEAT
MD REPEAT 1
( 1)
Searching for Tracks to Play
—MD Title Search
You can search for the tracks by their titles and play them
back.
For details on assigning a title, see pages 51 – 53.
1
Load an MD.
• If the current playing source is not "MD," press
MD 6, then 7 before going to the next step.
On the remote control ONLY:
2
Press TITLE SEARCH.
The TITLE SEARCH indicator lights up on
the display. Play mode changes to
Normal Play.
"TITLE" appears on the display and the character entry
position flashes.
TITLE SEARCH indicator
MD
Character set
3
Enter the character(s) to search for the track
title.
You can enter up to 5 characters. The unit will search for
the tracks which have the entered characters at the
beginning of their titles.
• You can also search for the tracks without a title. In this
case, go to step 4 without entering any character.
1) Press DISP/CHARA to select the
character set you want.
• Each time you press the button,
character set changes as follows:
Capital letters
& Symbols
Continued
TITLE SEARCH
TITLE SEARCH
Character entry
position
DISP/CHARA
Small letters
& Symbols
Numerals
24