Installing A Mezzanine Card - Asus RS400-E8-PS2 User Manual

2.5.3

Installing a Mezzanine card

You can install a supported Mezzanine card on the onboard slot.
To install a Mezzanine card:
1. Remove the slot bay from the Mezzanine card
expansion slot.
2. Prepare your Mezannine card and the signal cable. Connect the signal transmission
end (white) to the AUXLED_CON header on the motherboard.
AUXLED_CON1
3. Match and insert the four (4) screw holes on the Mezzanine card into the four (4) stand
screws on the chassis, then insert the Mezzanine card to the slot on the motherboard.
2-20
2
1
1
Q-Code
Chapter 2: Hardware setup
1
2
RESET
3
4