Installing An Expansion Card To The Riser Card Bracket - Asus RS400-E8-PS2 User Manual

Installing an expansion card to the riser card bracket

You need to remove the bracket if you want to install PCI Express x8 or x16 expansion cards.
To install a PCI Express x8 or x16 card:
1. Firmly hold the riser card bracket,
then pull it up to detach it from
the PCI Express x16 slot on the
motherboard.
2. Place the riser card bracket on a flat
and stable surface, then remove the
screw from the slot bay.
3. Install a PCI Express x8 or x16 card
to the bracket as shown.
4. Secure the card with a screw.
5. Install the riser card bracket and
PCI Express card assembly back
into the PCI Express x16 slot on the
motherboard.
6. Push the secure lock back and
secure it with a screw.
2-18
Q-Code
1
Q-Code
2
4
3
1
5
Chapter 2: Hardware setup