2.1
Chassis cover
2.1.1
Removing the rear cover
•
•
•
To open the chassis cover:
1.
Loosen the six thumbscrews on the cover with a Phillips screwdriver to release the
cover from the chassis.Keep the screws for later use.
2-2
Unplug the power cord from the power connector before removing the cover.
Be careful when removing the chassis cover. When removing any system component,
be careful with the CPU fan, chassis fan and other sharp edge to avoid hurting your
fingers.
The illustrations in this chapter are for reference only. The appearance may vary
depending on the model, but the installation steps are basically the same.
Chapter 2: Hardware setup