NEC Univerge SV8100 Features And Specifications Manual page 1620

Issue 13.0
When using a CS50 USB Headset for soft phone audio device, the Disable CS50 Power

Saving option should be checked in the Desktop Configuration Wizard. This disables the
CS50's power save/sleep mode which is not supported by UC Desktop Suite. Please note
that this will decrease the CS50's battery time.
NAT or NAPT is only supported on the DT700 series phones. NAT or NAPT is not

supported on the ML440, MH240, the Wireless DECT (SIP), SP310 or third party SIP
phones.
If analog Caller ID trunks are being used, Program 14-02-23 must be set to Wait Caller ID

for Salesforce to receive the caller ID for screen pops.
With CO lines, if TAPI is present in the system, there is a designed delay in ringing the

station so TAPI can capture the CID.
When using InMail integration, all clients must use shared services or all clients must be

used without shared services. A mixture of some clients with Shared Services and some
without is not supported when using InMail Integration.
If an Outlook appointment is set for less than 30 minutes and you open the Presence Form,

the duration is changed to 30 minutes.
Using up or down arrows in the Presence State fields in Web Client is not supported.

ACT! 2001, 2012 and 2013 are supported with the following conditions:

In Act>Tools>Preferences>Communications>Dialer Preferences choose NEC Single Line

Device as modem or line and uncheck Hide dialer after dialing.
Windows Phone and Modem properties need to be configured for local dialing.

With ACT! 2012 and 2013, use either the "Hang up" button in the ACT! dialer window to

disconnect the call or toggle the handset if you hang up the phone and close the ACT! dialer
window. Failure to do either would hold the dialer open in ACT!
With ACT! 2013, a reboot is required after configuring the integration.

The Outlook Add-in is supported with the following Outlook versions (32- and 64-bit):

Outlook 2003

Outlook 2007

Outlook 2010

Outlook 2013 (UC Desktop Suite Version 6.1.4 or higher or the standalone Outlook

Add-in 6.1.1 required).
Recurring Appointments in Outlook will not set recurring Presence changes in Desktop.

Only the initial change will occur.
Default Setting
None
2 - 1586
UNIVERGE SV8100
SV8100 UC Desktop Suite Applications