NEC Univerge SV8100 Features And Specifications Manual page 1421

UNIVERGE SV8100
Program
Program Name
Number
90-64-02 SNMP Setup – Community Name
90-64-03 SNMP Setup – Target Host 1
90-64-04 SNMP Setup – Target Host 2
90-64-05 SNMP Setup – Target Host 3
90-64-06 SNMP Setup – Target Host 4
90-64-07 SNMP Setup – Target Host 5
90-64-08 SNMP Setup – Domain Name
90-64-09 SNMP Setup – Trap Set Message
Simple Network Management Protocol (SNMP)
Description/Comments
Enter the SNMP community name.
Enter the IP Address of the PC
running the SNMP application.
Enter the IP Address of the PC
running the SNMP application.
Enter the IP Address of the PC
running the SNMP application.
Enter the IP Address of the PC
running the SNMP application.
Enter the IP Address of the PC
running the SNMP application.
Enter the Domain name.
When Disabled, the trap message
is sent to the SNMP application for
Major and Minor Alarms.
When Enabled, all trap messages
set to the SNMP application are
sent.
 When Program 90-64-09 is
disabled, all alarms that are
Minor or Major are output as
a trap message. For each
Alarm in Program 90-10, it is
possible to set the Alarm type
to Major, Minor and Not Set.
With Program 90-64-09
disabled, any alarms set to
Not Set are not trapped.
Assigned Data
1
12 Characters

Maximum
(default = Public)
(default = 0.0.0.0)

(default = 0.0.0.0)
(default = 0.0.0.0)
(default = 0.0.0.0)
(default = 0.0.0.0)
255 Characters
Maximum
(default = 0.0.0.0)
0 = Disable
1 = Enable
(default = 0)

Issue 13.0
Level
2 3





2 - 1387