6-26. Removing/Installing the Mounted
Board
n
Before removing the boards, be sure to turn off the main
power.
6-26-1. Plug-in Board
1. Remove the rear panel. (Refer to Section 2-7-4.)
2. Pull out the plug-in board in the direction of the arrow.
3. Re-attach the parts in reverse order of the disassem-
bling procedure.
SSS-12 board
SDI assembly
DVP-42 board, HPR-20 board,
SDI-94 board, CN-2905 board
6-66
AVP-7 board
6-26-2. CN-1968A Board
1. Remove the rear panel. (Refer to Section 2-7-4.)
2. Remove the two screws and two toothed washers, and
remove the CN-1968A board.
3. Re-attach the parts in reverse order of the
disassembling procedure.
CN-1968A board
Rear panel
6-26-3. CN-2905 Board
1. Remove the rear panel. (Refer to Section 2-7-4.)
2. Remove the SDI assembly. (Refer to Section 6-26-1.)
3. Remove the two screws and remove the CN-2905
board.
4. Re-attach the parts in reverse order of the
disassembling procedure.
PSW2 x 5
SDI assembly
B2 x 4
Toothed washers
CN-2905 board
HVR-1500