Removing/Reattaching Plug-In Board - Sony SRW-5800 Installation Manual

1-15. Removing/Reattaching Plug-in
Board
m
. Turn off the power and unplug the power cord before
removing/reattaching the board.
. When the plug-in board is replaced, refer to the mainte-
nance manual, volume 1.
Removing
1. Fully loosen the fixing screw.
2. Slide the knobs on upper lid (front) assembly each in
the inside. (Move the knobs to the outside to fix the
upper lid (front) assembly.)
3. Remove the upper lid (front) assembly in the arrow
direction.
Knob
Fixing screw
1-36 (E)
Upper lid (front) assembly
Knob
Removal
Installation
4. Fully loosen the two fixing screws.
5. Remove the upper lid (rear) assembly by moving in
the direction indicated by the arrow.
Fixing screw
Upper lid (rear)
assembly
Portion
Square hole
6. Open the eject levers on both ends of the board in the
direction of the arrows.
7. Hold the eject levers and slowly pull the board out.
1 1
2
Pulling out
Fixing screw
1 1
3 3
2
Insertion
SRW-5800