Fork Adjustment - Husqvarna NUDA 900 MY12 Operating & Maintenance Instructions

FORK ADJUSTMENT FOR "NUDA 900 R" ONLY
a) COMPRESSION (LOWER ADJUSTER)
Standard setting: 6 clicks
To reset standard calibration, turn adjuster screw (A)
clockwise to reach the fully closed position; then turn it
back the number of clicks specified above. Turn the ad-
juster screw clockwise to increase compression damping
or counterclockwise to decrease it.
-
EN - 36 SPECIFICATIONS - OPERATION - MAINTENANCE
b) REBOUND (TOP ADJUSTER)
Standard setting: 10 clicks
To reset standard calibration, turn adjuster screw (B)
clockwise to reach the fully closed position and then turn
it back the number of clicks specified above. Turn the
adjuster screw clockwise to increase rebound damping or
counterclockwise to decrease it.
WARNING*:Never
screws beyond the maximum open and
closed positions.
c) PRELOAD ADJUSTMENT
To adjust, turn the central nut (C) on the cap.
Turn the nut clockwise to increase the spring preload and
counterclockwise to decrease it.
-
+
B
A
force the adjusting
+
C