Headlight Adjustment - Husqvarna NUDA 900 MY12 Operating & Maintenance Instructions

HEADLIGHT ADJUSTMENT

When checking the proper aiming of the headlight beam:
inflate tyres at the right pressure, have a person sit
astride the motorcycle and set the motorcycle perpen-
dicular to its longitudinal axis
In front of a wall or a screen positioned at a distance of
10 metres (32.8 ft), draw a horizontal line correspond-
ing to headlight centre height, and a vertical line aligned
with vehicle longitudinal axis.
If possible, execute this operation in a shaded place.
When the low beam is on, the upper edge between dark
and lit zone should be at 9/10th of headlight centre from
ground.
Beam height can be adjusted as follows:
- Turn the adjuster screw (1) on the left side of the head-
light unit;
tighten to lower the beam,
loosen to raise the beam.
- Turn the adjuster screw (2) on the right side of the head-
light to adjust the beam horizontally.
1
SPECIFICATIONS - OPERATION - MAINTENANCE
2
EN - 45