Canon iR2200 Service Handbook page 213

DECRL-FN
Use it to enable or disable delivery curl reducing fan.
Settings 0: disable (default)
1: enable
Caution When '1' is selected, the curl reducing fan is rotated for 30 sec after the im-
age leading edge sensor goes ON.
TR-CLN
Use it to enable or disable transfer charging roller cleaning enhancement
mode.
Settings 0: disable (default)
1: enable
Caution Make sure that the transfer output between sheets for single-sided printing
is set to cleaning bias output.
FAN-EXTN
Use it to enable or disable the fan extension mode at the end of a job.
Settings 0: disable (default)
1: enable
Caution Use it to drive all fans for 5 min after the end of a print job received in sleep
mode.
USER
Making user-related settings
COPY-LIM
Use it to change the upper limit imposed on the number of copies.
Settings 1 to 999 copies (default: 999)
SLEEP
Use it to enable or disable sleep mode.
Settings 0: enable (default), 1: disable
SIZE-DET
Use it to enable or disable the original size detection function.
Settings 0: enable (default), 1: disable
Caution After making a selection, be user to turn off and then on the main power
switch.
COUNTER1
Use it to indicate the type of software counter 1 of the control panel.
Caution The type of soft counter 1 cannot be changed.
Settings 101: total 1 (default: fixed to 101) (T05-601-01)
CHAPTER 5 SERVICE MODE
COPIER>OPTION>BODY
COPIER>OPTION>USER
5-85