Canon iR2200 Service Handbook page 183

MF-A4
Use it to enter the paper width basic value for the multifeeder tray (A4).
Range of 0 to 1024
adjustment
<FIXING>
Use it to make fixing-relating adjustments.
If you have cleared the RAM on the DC controller PCB and replaced the PCB, be sure to
enter the settings indicated on the service label.
FX-FL-TH
Use it to enter the fine-adjusted value for the fixing film speed for thick pa-
per.
• Use it to make fine-adjustments in relation to the target control speed of
the fixing film when thick paper is selected.
Range of -3 to +3 (in msec; default: 0)
adjustment
FX-FL-SP
Use it to enter the fine adjustment value for the fixing film when plain paper
is selected.
• Use it to fine-adjust the target control speed for the fixing film when
plain paper is selected.
Range of -3 to +3 (in msec; default: 0)
adjustment
CHAPTER 5 SERVICE MODE
COPIER>ADJUST>CST-ADJ
COPIER>ADJUST>FIXING
5-55